Description
Nails Blue Shoe Tack - 500 grm 20* 1.6mm
- Large head nail provides stronger hold
- Used to hold floor coverings or upholstery work
- Internal use
These Shoe tacks are a large headed nail used to secure floor coverings or upholstery work, providing a strong hold.
— Related
Knuckle Nail Plates 4T10
Knuckle Nail Plates 4T10
Generally, Knuckle Nailplates will:
- Provide a strong, economical and easy-to-use means of jointing timber together.
- Protect timber from damage as they resist splitting due to drying of the timber, nailing near ends or other causes eg Bin Straps.
- Also reduce timber damage by resisting the effects of impact loads such as from fork lift tyne strikes.
- Distribute concentrated loads over a wider area, eg they increase the strength of bolted joints.
Knuckle Nailplates are galvanised steel connectors with in-built, bent-up “knuckle” nails. These plates are ideal for many structural and non-structural timber jointing and timber protection uses.
Among the many uses of Knuckle Nailplates, the most common are jointing of wall frames together on-site, on-site splicing of timber beams, reinforcement of corners of boxes and bins, and reinforcement of bolted joints (eg Cable Truss)
Nails Galvanised Clouts - 500 grm 30* 2.5mm
Nails Galvanised Clouts - 500 grm 30* 2.5mm
- Used for non-structural work
- Good corrosion protection
- Can be used for shade cloth and plastic trellis'
- Clouts
- External use
These galvanised plain shank clouts, are ideal for external sheet metal to timber connections. The wide flat head is well suited to preventing pull through.
Nails -Bright- Jolt Head - Prepacks - 400 grm 150* 5.6mm
Nails -Bright- Jolt Head - Prepacks - 400 grm 150* 5.6mm
- General purpose timber to timber use
- Plain shank
- Internal use
- Bullet Head
These bright steel Jolt head nails with plain shank, are suited to internal, general purpose timber to timber connections.
Nails -Bright- Flat Head - Prepacks - 400 grm 65* 3.15mm
Nails -Bright- Flat Head - Prepacks - 400 grm 65* 3.15mm
- Large head to prevent pull through
- Use in thin material for crates, pallets, cases
- Drill pilot hole when using in hardwood
- Internal use
These bright steel plain shank nails, are suited to internal timber to timber connections. They are ideal for use in soft timbers as the large flat head avoids pull through.
