Description
Sikaseal - Bathroom & Kitchen - Wet Areas Clear A1
- Non-sag, fast curing
- Excellent adhesion
- Great weatherability
- Interior and exterior usage
- Long term mould resistance
SikaSeal Kitchen and Bathroom is a one-component, neutral-curing, low odour silicone sealant with good adhesion and long shelf life for DIY application. SikaSeal Kitchen and Bathroom cures at room temperature under the action of atmospheric moisture to give a permanently flexible silicone rubber.
— Related
Sikaflex Tank N 600ml / 850 Grams Sausage
Sikaflex Tank N
High chemical resistance ▪
High mechanical resistance ▪
Movement capability of ± 25% (ISO 9047)Good application properties
Sikaflex® Tank N is supplied ready to use. After suitable substrate preparation, insert backing rod to the required depth and apply primer if necessary. Insert foil pack into sealant gun and extrude Sikaflex® Tank N into joint making sure that it is in full contact with the sides of the joint and avoid air entrapment.
Sikaflex Construction - Black 600 ml
Sikaflex Construction - Black
- One component, ready to use
- Weather resistance, excellent aging resistance
- Non Corrosive
- Movements capability /- 25% of average joint width at time of sealing
- Very good adhesion to many substrates
- Excellent workability
- High tear resistance
Sikaflex® Construction (AP) is a one part, moisture curing, elastic joint sealant based on polyurethane. It is suitable for indoor and outdoor applications.
SikaBond®-142 Instant Nails (Liquid Nails) 300g Beige
SikaBond - 142 Instant Nails
- One component ready to use
- Fast drying time
- Easy to use
SikaBond®-142 Instant Nails is a high strength contruction adhesive that will not slump on vertical surfaces. It can be used as a one way liquid adhesive, or a two way contact adhesive, on a variety of surfaces.
Sikaflex Tank N 600ml / 850 Grams Sausage
Sikaflex Tank N
High chemical resistance ▪
High mechanical resistance ▪
Movement capability of ± 25% (ISO 9047)Good application properties
Sikaflex® Tank N is supplied ready to use. After suitable substrate preparation, insert backing rod to the required depth and apply primer if necessary. Insert foil pack into sealant gun and extrude Sikaflex® Tank N into joint making sure that it is in full contact with the sides of the joint and avoid air entrapment.
